Product Dimension: 600 x 400 x 144 mm Advantages: 1: could be assembled to be 1/2 pallet with dimension 800 x 600 x 144 mm (31' x 24 ' x 5.7') 2. Could be assembled to be 1 big complete pallet with dimensions 1,200 × 800 × 144 mm (47.2' × 31.5' × 5.7') 3. Mold design with 4 tips hot runner with big runner gate for easier material flow

A Petri dish is a laboratory vessel for the cultivation of microorganisms or cells. It consists of a flat disc-shaped bottom and a cover, usually made of glass or plastic. There are basically two types of dish materials, mainly plastic and glass. Glass can be used for plant materials, microbial culture and animal cell wall culture. Plastic may be polystyrene material, which can be used for one time or multiple times. It is suitable for laboratory inoculation, scribing and bacteria separation. It can be used for the cultivation of plant materials.

Plastic Cups are containers for drinks and tea. Usually made of PP and PS material. Generally used in beverage stores, hot and cold drink stores, milk tea shops, hotels, restaurants, and coffee shops, which provide a variety of plastic cup drinks to go and on-site.

Please refer to this romantic double color cup, which is designed for making by two-color rotary injection mould. The technological key-point is the logo or totem which customer would like to make with double color injection. If the totem is tiny, small or complicate, it is not only for making double color plastic injection mould, but also for two-color injection.

Paint bucket mould and plastic moulding painting bucket. The technical point for the painting bucket is the painting bucket wall eccentric and ejection system. Paint bucket is different as all the other kinds of bucket, there is one undercut on the edge of the bucket mouth, and this undercut (rib) need to be stripped before it drop down.

Plastic liquor caps are different from the ones we usually use. They are not sealed by threads or barbs like plastic caps of mineral water bottles, but by oak plugs. However, the oak plugs may cause decay or cracking after long-term and long-distance transportation or weather, plastic caps are needed to keep them sealed and protect oak plugs.

The plastic raw material of 5G cap is LLDPE, which has high gloss, high heat resistance and better fluidity than the general materials. In addition, the steel of mold core and cavity is S136, with a hardness of 48-52, which can better for mold life. It could be design with 12 cavities or 16 cavities, each cavity has its own independent cooling system to ensure that the products can be better shaped and cooled.

Product size: 242.3 X 336.7 X 183.2 Product weight: 265.7g Core/Cavity Steel: 718H Product material: PP Injection: Cold runner

This design is really complicated; it has not only sliders in the 4 sides like normal crates, but also many lifters to form the bottom design. We used hundreds of pins to form the needle shapes. There are many small holes in the middle part of the crate, which makes the mold more difficult, because we have to add sliders to form these holes under the existing complex mold structure. Because of the intricate structure design at the bottom, NC processing takes a lot of time.