The soap box must have the following design: 1. Anti-dip strip design. The anti-dip strip on the surface of the soap box can support the soap to a greater extent and reduce the probability of the soap soaking. 2. Drain tank design, convenient drainage. Soap box of the drain tank, convenient the water to flow out. 3. The bottom foot is designed to ensure that the soap box is at a certain height from the table. Even if there is water around the soap box, it will not be deposited in place.

Pebbled Bowls offer an elegant, shatter-proof take on the classic salad bowl, enhancing presentation and menu offerings. This selection of bowls is ideal for catering, outdoor events, and buffets, with a variety of sizes to suit fruit, snacks, and desserts. With a textured glass look on the outside, the interior is smooth for easy cleaning by hand or commercial dishwasher. Made of virtually unbreakable anti-wear for years of dependable service.

The mould of this double color plastic container is designed for making on two-component injection molding machine. How to connect the two parts of lid and body with double color, how to make the thin part between two colors to prevent from tearing after folding couple times, how to keep clear two colors without over flow. All these factors are the key-points of technology to design and fabricate this kind of two-color injection mould.

Focare Mould demonstrates the capability of design and the power on double color molds. The new two-color collapsible strainer is so high quality. The product has fine appearance, delicate texture, and good feeling when holding and collapsing.

This double color cosmetic cap is not only two colors, but also the caps have to be demoulded out from mold by unscrew device instead of conventional forced ejection. The mold structure is more complicate than other double color mold and mold dimension is bigger. Moreover, the steel of unscrew device shall be high-end quality with heat treatment in order to avoid wearing and tearing in short time of movement.

This double color plastic egg tray is made out of PP (white body) +TPE (orange bottom) by the two-color rotary injection mould, and the cover is made out of GPPS which is transparent and stronger, using TPE as bottom in order to keep eggs out of crushing, what’s more, we put four anti-slip pads each corner under the bottom to keep it away from slipping on the table or the fridge.

Since the annual output of tension meter is not large and the customer needed to save cost, they decided to put all the plastic parts of the tension meter on the same mold. Due to the high requirements of the appearance quality of the plastic parts and the high requirements of the size and assembly accuracy, the mold we designed adopts the multi cavity and multi parting surface.

Flip top shampoo cap is one-time use of large-scale production product. Normally, after injecting, there is no more surfaces processing, and it can directly enter the subsequent automatic packaging. Therefore, the appearance of the flip top shampoo cap is required to be high, and there are no obvious molding defects.

This collapsible double color plastic ice cube tray is made out of PP (white body) +TPE (orange bottom) material by the two-color rotary injection mould, and the most essential part of this mold is the preciseness of the TPE’s thickness, so it makes the design became very important.