Plastic liquor caps are different from the ones we usually use. They are not sealed by threads or barbs like plastic caps of mineral water bottles, but by oak plugs. However, the oak plugs may cause decay or cracking after long-term and long-distance transportation or weather, plastic caps are needed to keep them sealed and protect oak plugs.

The plastic raw material of 5G cap is LLDPE, which has high gloss, high heat resistance and better fluidity than the general materials. In addition, the steel of mold core and cavity is S136, with a hardness of 48-52, which can better for mold life. It could be design with 12 cavities or 16 cavities, each cavity has its own independent cooling system to ensure that the products can be better shaped and cooled.

Product size: 242.3 X 336.7 X 183.2 Product weight: 265.7g Core/Cavity Steel: 718H Product material: PP Injection: Cold runner

This design is really complicated; it has not only sliders in the 4 sides like normal crates, but also many lifters to form the bottom design. We used hundreds of pins to form the needle shapes. There are many small holes in the middle part of the crate, which makes the mold more difficult, because we have to add sliders to form these holes under the existing complex mold structure. Because of the intricate structure design at the bottom, NC processing takes a lot of time.

The lunch box design is very lovely; there are two layers which can let you separate your food. The clip function is made directly on the lid, so we can save one mold for clips. There are two clip designs in each side, so the lunch box can overlap to save space after eating. The volume is 420 + 760 ml, it is just enough for school children to eat, will not cause waste.

Beer crate 1. 12 bottles: 360 * 275 * 316mm 2. 20 bottles: 450 * 365 * 315mm 3. 24 bottles: 530 * 360 * 320mm It is made of 100% high-density polyethylene (HDPE) for injection molding. It has the characteristics of heat resistance, cold resistance and corrosion resistance. It can withstand high temperature up to 120 degrees and low temperature resistance to minus 30 degrees. And the appearance is smooth, no burrs, and durable!

Due to the rapid economic development, there are more and more people choice take-away meals, and therefore the demand for disposable tableware is also growing. Generally, the material of disposable knife, fork, spoon is PP and PS. Because of the different material, the choice of mold steel will be different. Most of the steel of disposable knife, fork and spoon is made of quenched grade steel, such as H13, S136, 2344, 2316, etc.

The advantages of two-color O-ring are as below: 1. It consists of a plastic reinforced double component seal ring which holds the O-ring in groove properly, thus ensuring 100% leak proof joints 2. Enough power to the joints to withstand high pressure flow rates 3. Dimensional stability, remains intact while installation. 4. Easier installation. 5. Passes pressure test requirement. 6. Can be made in color combination desired by customer. 7. It is made with the advanced co-moulding technology

Normally the double color plates are made in two sizes, diameter 20cm and 25cm. They are thin, light but strong. However, the sizes, the weight and the design of the plate are all customized. Focare Mould, we have professional design team to design both products and moulds.