The basic information of two-color cup plastic injection mold:  Steel: 718H (HRC30-33) Cavity: 2+2 Injection: 4 points hot runner (valve gate) Ejection: stripper plate Suggested Machine: 280T two-color plastic injection machine with rotary table Size: 900x600x590mm, 1180kgs

Product information Material: PP+TPE Body: DIA 92 mm x 82 mm Lid: DIA 94 mm x 7 mm Weight: 52g

Material : PC Product size: ø77 X 129.5мм Product weight: 122g Cavity: 1+1+1 Mould steel: H13 with hardness 48-52HRC Hot runner system: 3tips valve gate Mould size: 480 X 680 X 580мм Mould weight: 1243kg Suitable three-shot rotary injection machine: 260ton

The two-color collapsible water cup is made of PP + TPE material, which has certain high and low temperature resistance. It is safe and sanitary to use and can be used in various environments. When using, it is very simple. It only needs a few steps to collapsible the cup. After collapsible, it can be easily carried in the bag, or even directly put into the jeans pocket, which is very humanized.

Double color molding process is that the two-color products are moulded by one double color injection machine and two-color mold at once, the double color product is only ejected once. Generally, this molding process is also called two-component injection molding, which is usually completed by a set of molds and requires a special two-color injection molding machine. Plastic products are used two different color, two different types of plastics or two identical plastics, and the two plastics can be clearly distinguished on the product are called two-color plastic products. Installed in a two-color injection molding machine with two sets of injection devices, a mold that injects two plastics in sequence and generates a two-color product is called a two-color mold.

This straw handle cup is divided into two sets of molds, one is the cup body and the other is the cup cover. In design, the cup body cavity 2 spring block slides. When opening the mold, it depends on the pull hook on the mold core side to start in an instant, and then the spring pushes the spring block out, and the mold core side directly relies on the machine to push the ejector plate to eject the product and drop. When the cup cover is opened, slide the 2 sliding blocks on one side of the core to both sides through the inclined guide post to separate the sliding blocks from the product. The 2 sliding blocks are designed on the pusher plate to eject the product as a whole.

Plastic Cups are containers for drinks and tea. Usually made of PP and PS material. Generally used in beverage stores, hot and cold drink stores, milk tea shops, hotels, restaurants, and coffee shops, which provide a variety of plastic cup drinks to go and on-site.

Please refer to this romantic double color cup, which is designed for making by two-color rotary injection mould. The technological key-point is the logo or totem which customer would like to make with double color injection. If the totem is tiny, small or complicate, it is not only for making double color plastic injection mould, but also for two-color injection.

It is double color product, why the cup look three color? In addition to the material PP+PP, we have also added to special color master to let double color cup become gradient color. Meanwhile, the thickness of double color plastic cup is also designed different from standard cup.