• Plastic ice scoop injection mold

    Plastic ice scoop injection mold

    Plastic ice scoop is in direct contact with food, and the standard requirements for finished products are definitely higher than general household products. The scoop is fine, smooth, no blur... etc. To produce high-quality finished products, we need high-quality molds. Focare Mould, we have the ability to design products for you. With a fully communication, we can help you create your own project. Having years of experience in designing all kinds of plastic injection moulds, we are able to design the mould with good injecting, ejecting, and cooling system. With the high precise CNC machines, we control the precision of plastic injection mould within 0.01mm to provide high-end quality mould.

    Read More
  • Plastic drain basket injection mold

    Plastic drain basket injection mold

    This is a portable fruit and vegetable plastic drain basket which can be seen in every kitchen. It is made of high-quality plastic materials and is durable. If you want to wash fruits and vegetables, that would be a good choice. With the creative design of plastic drain basket and tray, you can separate the two products and then filter the water.

    Read More
  • Plastic toys injection molds

    Plastic toys injection molds

    The advantages of plastic toys are as follows: a. Plastic toys are waterproof, lightweight, and suitable for children to play. b. Plastic toys are relatively cheaper, as the cost of plastic manufacturing is low. c. Most plastics toys have strong corrosion resistance and long service life. d. Compared with glass toys, plastic toys are not easy to be broken. e. Plastic toys have better plasticity than other kinds of material toy.

    Read More
  • Plastic Kitchen Utensils Injection Mold

    Plastic Kitchen Utensils Injection Mold

    Most of the materials for kitchen utensils are PA. PA has good comprehensive properties, including mechanical properties, heat resistance, abrasion resistance, chemical resistance and self-lubrication, and has a low coefficient of friction. The reason is that it makes it easy for people to grab it and put it back in place. It also condenses the space of the cutlery box and provides decoration for the kitchen interior design, thus creating a delicate design for the kitchen.

    Read More
  • Refrigerator drawer plastic injection mold

    Refrigerator drawer plastic injection mold

    Refrigerator drawer belongs to large-scale production plastic mold and requires high standard, so single cavity injection molding process and point gate hot runner are used in injection molding. For the parting surface of the drawer, it determines the structural form of the whole mold, so this design adopts the injection mode of the double parting surface to achieve the stability of the whole refrigerator drawer structure.

    Read More
  • Plastic paint bucket injection mold

    Plastic paint bucket injection mold

    There are several methods to test plastic paint buckets: 1. Airtightness test: After assembling the matching lid to fill the plastic paint bucket with 80% of water, the bucket should be dumped. The lid should not fall off or leak. 2. Push-down test: After assembling the matching lid to fill the plastic paint bucket with 80% of water, stack three buckets together, tilt them and let the buckets fall; the bucket lid cannot be opened. 3. Drop test: After assembling the matching lid to fill the plastic paint bucket with 80% of water, drop it at an inclined angle of 45 ° at the bottom of the bucket at a height of 80cm. The lid cannot be separated from the bucket, and the bottom of the bucket must not be broken. 4. Special test: After assembling the matching lid to fill the bucket with 80% of water, stack 4 buckets without deformation for 7 days. 5. Side leak test: Fill the bucket with 80% of water and leave to stand for 30 minutes without leakage; turn to the opposite side for 30 minutes without leakage.

    Read More
  • Plastic fan blade injection mold

    Plastic fan blade injection mold

    The whole structure has the following advantages: 1. The rigidity of molding products is good. 2. mold is easy to be assembled and disassembled. 3. The number of mold parts is small. 4. There are few parting marks on the surface of the product. 5. The external dimension of the mold can be reduced. ​

    Read More
  • Hair dryer plastic injection mold

    Hair dryer plastic injection mold

    Focare mould adopts customized mould base design, which greatly improves mould production efficiency. According to the material of the hair dryer product, the mould core part and cavity part are made of high-quality S136 steel, which has excellent corrosion resistance and polishing performance. In the process of processing and hardening, it has good dimensional stability and can ensure the assembly performance of all parts of the product.

    Read More
  • Classical Plastic Flower Pot Injection Mould

    Classical Plastic Flower Pot Injection Mould

    The shape of the flower pot can be customized according to the customer's needs. If you are interested in the flower pot mold, please contact us. We can design the ideal product shape for the customer, and carry out mold design, as well as professional mold processing and production, and testing. Stencil. We have a set of high-precision CNC machines, and we are proud of our ability to make high quality plastic injection molds. Providing plastic injection molds with the highest CP value and creating a win-win situation has always been our goal.

    Read More
<2345678>Total 90 Records
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Email :
Company :
  • Name :

  • Phone :

Message :

Privacy policy