The total weight of the whole set plastic toilet seat is 650 gm, made by PP. The two plastic injection moulds of main body are made 1 cavity with one tip hot runner. As for the rest of the components we apply cold runner and 4 cavities. Seven moulds plus a 125 and 350 ton plastic injection machine is sufficient to manufacture a plastic toilet seat, which is really a good investment while the toilet seat is so high demand on markets.

1. PP engineering plastic, good bearing capacity, beautiful appearance, strong plasticity, various colors, large internal volume of portable toolbox. 2. The worktable adopts unique injection molding, with higher strength and smooth surface treatment, it is easy to wipe oil stains. The injection panel can bear the bench vice operation 3. Abundant tool modules can be stored in the drawer of toolbox 4. Sliding guide rail design is adopted on both sides of drawer, which has excellent smoothness and improves service life. The extended distance enables the drawers to be fully opened, making it easy to extract the objects inside the drawers. 5. Each drawer has self-locking function 6. It is suitable in size and can be stored in the trunk of the car. It is convenient. Toolbox of different sizes can be built in together.

Most of customers don’t want to invest double color injection machine. However, you can consider to produce two plastic products on your double color machine in future, or produce only one plastic part on double color machine. It won’t leave your double color injection machine unused if double color products range has not yet been developed too much. Two-color plastic injection products become more popular at market day by day, it is right time to invest and develop double color plastic products at this moment.

Industrial safety helmets are widely used on building and workshop to protect the head from injury due to falling objects, impact with other objects, debris, rain, and electric shock. For making plastic industrial safety helmets, PC or ABS plastic material are the best selection which has the best impact resistance, light weight, high toughness, less fracture, and easy processing.

Traditional plastic injection tables have separated table legs. This means that the table top and the table legs are separate. In this way, we not only need to have extra mold for the table legs, the strength of the entire table will be weakened by the separate table legs. This plastic outdoor table is one-piece. The strength of the table is much stronger than separated tables. Besides, you don’t need to pay for extra leg mold.

The acceptable checking list of swing cover of dustbin are as below: 1. Cover shall be flat without deformation. 2. Cover of trash bin shall align the same level with cover supporter. 3. Cover shall come back original position automatically after swinging. 4. Cover be rotated evenly. 5. Supporter of cover is prohibited being deformed after ejecting out from mold cavity and cooling. 6. No flash around supporter.

This floor drain is made by rigid PVC which mould steel shall be used S136. The steel structure is pure and fine, with excellent corrosion resistance, polishing, wear resistance, machining, and dimensional stability when quench. S136 can be used in all molds. Because of its special properties and materials, it is more suitable for the application and needs of special environment.

The core of two-color peeler plastic injection mould is made inserted, which can be replaced for different design. As the result of product being short, we design the products be injected horizontally that allow product to have lesser parting line and ejector mark.

The characteristic of this kind of multi-color injection moulding is to transform the general single color product into a multi-color mixed product without changing the mould, making them like various grain patterns such as wood grain, marble, jadeite and so on, without having to go through two processing procedures such as spray painting and water dyeing.