This straw handle cup is divided into two sets of molds, one is the cup body and the other is the cup cover. In design, the cup body cavity 2 spring block slides. When opening the mold, it depends on the pull hook on the mold core side to start in an instant, and then the spring pushes the spring block out, and the mold core side directly relies on the machine to push the ejector plate to eject the product and drop. When the cup cover is opened, slide the 2 sliding blocks on one side of the core to both sides through the inclined guide post to separate the sliding blocks from the product. The 2 sliding blocks are designed on the pusher plate to eject the product as a whole.

DISH RACK 16 HOLES Product Size: 489 x 489 x 100mm Mold Design: 1. Cavity and Core made by splicing inserts 2. High-efficiency cooling system 3. 4 sliders design for Core with oil cylinders 4. Runner Gate with 5 tips Hot Runner to Submarine Gate

Grater Size: 229 x 146 x 80 mm Type: Cheese, Fruit & Vegetable Tools Material: Food-grade PS and PP Fruit & Vegetable Tools Type: Graters Function: Grinding mud. Grinding paste. Suitable for the elderly and children 1. Simple mold design for easy maintain 2. The independent core pin for holes. 3. Ejection system: Stripper Plate and achieve a 360 degree air blast to avoid vacuum condition after injection.

Cap size: ø90.7 X 93 X 25mm Cap weight: 36gm Material: HDPE Mold: 4 cavities The thread part of this cap is designed with thread rotation off, and the motor device is used to drive the gear to rotate. The cap must be designed with a stop device to prevent the product from following the rotation when the thread rotates, resulting in the scratch of the cap thread. After the thread part of the cap is separated, use the ejector plate to eject. Compared with thread strength and thread rotation, thread rotation is more difficult to make, which requires high-precision processing equipment, high installation accuracy and accurate positioning between plates, otherwise it is easy to cause the problem of parts stuck and motor or oil cylinder not moving.

The bathroom corner shelf is well-designed. The shape is triangle, which is appropriate to assemble in the corner. It has three spaces and two covers. For the first compartment it is out of cover, which is suitable for the waterproof commodity such as toothbrush set and shampoo whose size is taller. For the second compartment, you are suggested to put toilet paper and sanitary product into for preventing them from wet. As to the last also the smallest compartment, it is the best place to keep soap inside. At the bottom of the shelf has three hooks, you can hang towels, bath ball or anything you need in your bathroom.

Product Size: 29.5x20x7mm The plastic injection mold of this thin-wall container is used transparent PP material. The product is ejected out by stripper, assisted by air, and the product is injected by two tips of hot nozzles at the front part of the mold. The cooling system is evenly arranged. It is a classic single color box mold design. However, it is thin-wall container, which cores and cavities of mold shall be made high-end steel with heat treatment. Meanwhile, all moving parts shall be used durable anti-wearing steel to have longer mold life.

The mold is simple 2-plate mold structure, but because it is a puzzle product, there are a lot of small parts, the positions between parts and the pouring points are very skillful, if the arrangement is not good, there will be flash problems, air trap problem. Products are ejected out by pins. There are many ejectors in this mold, so ejector balance of ejector plate is very important. The most characteristic is that the mold runner is also a part of the product, is the product frame and fixed base.

Laundry Basket Size: 489.2 X 622.7 X 233.9mm Basket Weight: 0.59 kgs Gate system: 5 tips Hot Runner Not all molding applications are suitable for runner-less molding. Some materials are heat sensitive and the time to temperature relationship - especially when the shot size is very small - can be a problem. Some families of parts, for handling and orientation purposes, may be best kept attached to the runner until they reach another downstream operation. In other instances, the required volume of parts may be so small that the added cost of the hot runner system to the mold price cannot be justified.

Each cavity of this cap mold is designed with separate inserts, so that each cavity product in the process of injection molding maintain the same injection molding pressure, clamping force and other molding conditions, so that the product quality is more stable and reliable. Moreover, the independent insert design can make the life of the mold longer. If there is any problem with the parts, the parts can be directly replaced without affecting the production schedule.