• Double Color Clear Plastic Box Mould

    Double Color Clear Plastic Box Mould

    The mould of this double color plastic container is designed for making on two-component injection molding machine. How to connect the two parts of lid and body with double color, how to make the thin part between two colors to prevent from tearing after folding couple times, how to keep clear two colors without over flow. All these factors are the key-points of technology to design and fabricate this kind of two-color injection mould.

    Read More
  • Double Color Lotus Collapsible Strainer Plastic Injection Mould

    Double Color Lotus Collapsible Strainer Plastic Injection Mould

    Focare Mould demonstrates the capability of design and the power on double color molds. The new two-color collapsible strainer is so high quality. The product has fine appearance, delicate texture, and good feeling when holding and collapsing.

    Read More
  • Double Color Cosmetic Cap Plastic Injection Mould

    Double Color Cosmetic Cap Plastic Injection Mould

    This double color cosmetic cap is not only two colors, but also the caps have to be demoulded out from mold by unscrew device instead of conventional forced ejection. The mold structure is more complicate than other double color mold and mold dimension is bigger. Moreover, the steel of unscrew device shall be high-end quality with heat treatment in order to avoid wearing and tearing in short time of movement.

    Read More
  • Durable Double Color Plastic Egg Tray

    Durable Double Color Plastic Egg Tray

    This double color plastic egg tray is made out of PP (white body) +TPE (orange bottom) by the two-color rotary injection mould, and the cover is made out of GPPS which is transparent and stronger, using TPE as bottom in order to keep eggs out of crushing, what’s more, we put four anti-slip pads each corner under the bottom to keep it away from slipping on the table or the fridge.

    Read More
  • Double Color Plastic Collapsible Ice Cube Tray

    Double Color Plastic Collapsible Ice Cube Tray

    This collapsible double color plastic ice cube tray is made out of PP (white body) +TPE (orange bottom) material by the two-color rotary injection mould, and the most essential part of this mold is the preciseness of the TPE’s thickness, so it makes the design became very important.

    Read More
  • Double Color Romantic Cup Plastic Injection Mould

    Double Color Romantic Cup Plastic Injection Mould

    Please refer to this romantic double color cup, which is designed for making by two-color rotary injection mould. The technological key-point is the logo or totem which customer would like to make with double color injection. If the totem is tiny, small or complicate, it is not only for making double color plastic injection mould, but also for two-color injection.

    Read More
  • Two-Color Flower Design Jug Plastic Injection Mould

    Two-Color Flower Design Jug Plastic Injection Mould

    This two-color flower design jug fit all the conditions that mentioned above. It is light, durable, handy, beautiful and special, which is truly a good choice for plastic product manufacturer to produce. The pattern of the double color water jug is customized, so if you are not satisfied with the flower pattern and have a better thought of the design, welcome to share us your idea and we’ll estimate and redesign it for you.

    Read More
  • Double Color Seal Ring of SWP Pipe Fittings Plastic Injection Mould

    Double Color Seal Ring of SWP Pipe Fittings Plastic Injection Mould

    The advantages of two-color O-ring are as below: 1. It consists of a plastic reinforced double component seal ring which holds the O-ring in groove properly, thus ensuring 100% leak proof joints 2. Enough power to the joints to withstand high pressure flow rates 3. Dimensional stability, remains intact while installation. 4. Easier installation. 5. Passes pressure test requirement. 6. Can be made in color combination desired by customer. 7. It is made with the advanced co-moulding technology

    Read More
  • Double Color Diamond Plate Plastic Injection Mould

    Double Color Diamond Plate Plastic Injection Mould

    Normally the double color plates are made in two sizes, diameter 20cm and 25cm. They are thin, light but strong. However, the sizes, the weight and the design of the plate are all customized. Focare Mould, we have professional design team to design both products and moulds.

    Read More
<123456>Total 47 Records
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Email :
Company :
  • Name :

  • Phone:

Message :