- Home
- >
- Products
- >
- Injection Molding Machine
- >
- OEM Personalized over molding products Supplier
OEM Personalized over molding products Supplier
OEM Personalized over molding products Supplier:The injection mold consists of two parts: dynamic mode and fixed mode. The moving mold is mounted on the mobile template of the injection molding machine, and the fixing die is installed on the fixed template of the injection molding machine. In injection molding, the pouring system and cavity are formed by the closing of the active mode and the fixed die, and when the mold is opened, the active die and the fixed die are separated and the plastic products are removed.In order to reduce the heavy workload of mold design and manufacturing, most injection molds use standard mold seats.
OEM Personalized over molding products Supplier
The pouring system refers to the pouring part of the plastic from the nozzle into the cavity, including the main gate, the cold material hole, the shunt gate, the gate and so on.
The pouring system, also known as the pouring system, is a set of feed channels that lead the plastic melt from the ejector nozzle to the cavity. It is usually made up of mainstream roads, shunt streams, gates and Lengkong.
It is directly related to the molding quality and production efficiency of plastic products. is the channel in which the nozzle of the injection molding machine is connected with the shunt channel or cavity inside the mold. The top of the main channel is concave and connected to the nozzle. The inlet diameter of the main channel should be slightly larger than the inlet diameter (0.8mm) of the nozzle to avoid leakage and prevent blockage due to improper connection. The diameter of the import depends on the size of the product, which is generally 4-8 mm. The diameter of the main channel should be increased inward at a 3-5-degree angle to demoulding the fat from the road.
