• Two-color collapsible foot bath bucket plastic injection mold

    Two-color collapsible foot bath bucket plastic injection mold

    The two-color collapsible foot bath bucket is made of PP+TPE, which make the bucket not only foldable, but also mixed colors. The bucket looks more attractive to everyone than an ordinary plastic bucket. We only need to fold one side first, and then fold the other side; the height of the bucket is only 7 cm after folding. This size makes the two-color collapsible foot bath bucket is easy to be storage after folding.  The bucket can be placed freely in any corner.  With the notch design in the bottom, the bucket can be hung on the wall to save space after folding.

    Read More
  • Two-color square basin plastic injection mold

    Two-color square basin plastic injection mold

    The two-color square basin is made of PP+TPE.  The raw material PP is strong enough and let the basin has a very good support when it is filled with water.  The raw material TPE is soft and let the two-color square basin be foldable.  The two-color square basin is foldable and retractable freely. It is thin and light without taking up space.  It is suitable for home and outdoor use.  As the height of the two-color square basin is only 5.5 cm after folding, one can put it inside any size of luggage case. So, we don’t need to care about if the washbasin in the hotel is clean or not, just put a two-color square basin in the suitcase and we can easily use it in the hotel.

    Read More
  • Two-color collapsible water cup plastic injection mold

    Two-color collapsible water cup plastic injection mold

    The two-color collapsible water cup is made of PP + TPE material, which has certain high and low temperature resistance. It is safe and sanitary to use and can be used in various environments. When using, it is very simple. It only needs a few steps to collapsible the cup. After collapsible, it can be easily carried in the bag, or even directly put into the jeans pocket, which is very humanized.

    Read More
  • Portable & Collapsible Pet Food & Water Bowl Double Color Plastic Injection mould

    Portable & Collapsible Pet Food & Water Bowl Double Color Plastic Injection mould

    The bowl made of this PP + TPE material has the following advantages: 1. Folding design, easy to go out. 2. Non-toxic plastic, safe, durable and easy to clean. 3. Hanging buckle design, can be hung on the cage or pet stroller. 4. Bottle hanging design, which can be installed on the water bottle to make the dog eat better.

    Read More
  • Double Color Plastic Injection Mold for Mobile Phone Charging Holder

    Double Color Plastic Injection Mold for Mobile Phone Charging Holder

    This double color mobile phone holder has many advantages, such like: 1. It's light and portable, saving space. 2. It is suitable for all kinds of mobile phones, digital cameras, MP3 players, and other portable small appliances. 3. It is very convenient to fold when not in use and easy to open when in use. 4. You don’t need to worry about the length of the cable when charging anymore. It's a good helper when charging your mobile phone! 5. It is made of high quality PP material, resistant to dirt, convenient and easy to clean. 6. The support plate is made by two-color injection molds which is more colorful and much more eye attractive than single color one.

    Read More
  • Double Color Stationery Storage Basket Mould

    Double Color Stationery Storage Basket Mould

    This two-color bucket height is high, so the mold cavity bottom and core are used insert design, such benefits are more convenient mold lighting, lighting effect is better, the product looks good, and the processing difficulty is reduced, the processing size is more accurate, saving labor costs and processing costs. Moreover, the insert is replaceable and the replacement cost is low, so it also improves the fault tolerance rate of mold making and reduces the loss caused by processing errors. The mould adopts stripper design, which is stable and not easy to ejector trace, which makes the product more beautiful and easy to use.

    Read More
  • Double Color Wheel of Toy Car Plastic Injection Mould

    Double Color Wheel of Toy Car Plastic Injection Mould

    This double color wheel is made by PP of wheel frame and TPE of outer soft part. PP is rigid material which is good enough to support the weight of toy car. The weight of PP is lighter than steel frame, it is suitable for making toys. TPE could be produced by traditional injection molding machine, meanwhile, PP and TPE could be injected and plasticized together well, not easy to be separated by force. The mold is designed for rotating double color injection moulding process. The rotary double color injection mold is composed with two molds, the first mold is for making PP part, second mold for TPE part after PP part being injected and rotated to second position.

    Read More
  • Two-Color Plastic Bucket, Basin, Mug, Jug

    Two-Color Plastic Bucket, Basin, Mug, Jug

    Plastic buckets, basins, mugs and jugs are common plastic household. The best way to increase the added value of these plastic products is to make it by double-color injection.

    Read More
  • Two-Color diamond and knitting Bowl Plastic Injection Mould

    Two-Color diamond and knitting Bowl Plastic Injection Mould

    A piece of art, the two-color diamond and knitting plastic bowls look so luxurious. The extraordinary texture integrates the ancient times into modern life. Not only do them own classy appearance, but also the function of non-slip and anti-scalding of two-component plastic bowl, which make the bowls attractive and popular on markets.

    Read More
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Email :
Company :
  • Name :

  • Phone:

Message :