• Double-Color Plastic Dustpan Injection Mold

    Double-Color Plastic Dustpan Injection Mold

    Most of dustpans are made with soft edge to capture more dust, which touches floor closely. The plastic material of main body for dustpan generally is PP, soft edge is TPE or soft PVC. In order to save investment each machines and molds, the conventional dustpans are molded with PP at the first injection, then made over molding with TPE or soft PVC at the second process. Now, all the production costs are rising up, including labor cost, rental expense, plastic material and so on. Moreover, the output is less and defectives are higher for making 2-step injection molding. Double components injection molding in one step become more popular.

    Read More
  • Two color 2k medical oxygen mask mold

    Two color 2k medical oxygen mask mold

    2+2 Two color 2k adult oxygen mask mold Product Material: PP+TPE Mold Cavity : 2+2 Hot runner system: 2 points hot runner Suggested machine: 400 tons two color rotary table injection machine

    Read More
  • Two-color Plastic Collapsible Strainer Injection Mold

    Two-color Plastic Collapsible Strainer Injection Mold

    A strainer / colander is a kitchen utensil used to strain foods such as pasta or rice or to rinse vegetables. The perforated nature of the colander allows liquid to drain through while retaining the solids inside. It is sometimes also called a pasta strainer or kitchen sieve.

    Read More
  • Plastic photo frame injection mold

    Plastic photo frame injection mold

    Focare Mould Co., Ltd. is a professional manufacturer of mould and plastic products. We have perfect ability of designing, developing, testing and making plastic injection moulds. Our professional technicians have many years of rich production experience. Since the establishment, we sincerely welcome customers from home and abroad to visit our factory for guidance and create a brilliant future with the principle of "professional quality, service value".

    Read More
  • Double Color Cosmetic Cap Plastic Injection Mould

    Double Color Cosmetic Cap Plastic Injection Mould

    This double color cosmetic cap is not only two colors, but also the caps have to be demoulded out from mold by unscrew device instead of conventional forced ejection. The mold structure is more complicate than other double color mold and mold dimension is bigger. Moreover, the steel of unscrew device shall be high-end quality with heat treatment in order to avoid wearing and tearing in short time of movement.

    Read More
  • Multi-Color-Over Molding

    Multi-Color-Over Molding

    Two-color over molding process is the lower investment for making two-color plastic products. For some bigger size two-color products or two-color plastic parts with lower market demand, it is not economic to invest two-color injection machine and two-color injection molds. Two-color over molding process is the best choice for making two-color plastic products.

    Read More
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Email :
Company :
  • Name :

  • Phone :

Message :

Privacy policy