- Home
- >
- Products
- >
- Injection Molding Machine
- >
- Best Designer double color injection molds Traders
Best Designer double color injection molds Traders
Best Designer double color injection molds Traders:Structural parts refer to the various parts that make up the mold structure, including guidance, demoulding, core pumping, fractal and other parts.
such as front, rear splint, front, back buckle template, load-bearing plate, load-bearing column, guide column, off the template, stripping rod, return rod and so on.
Best Designer double color injection molds Traders
1. The Guidance component In order to ensure the accurate alignment of the moving mode and the fixed die in the mold, the rail components must be set in the mold. In injection molds, four sets of guide columns and guide sleeves are usually used to form guides.
Sometimes, internal and external cones coincide with each other set in dynamic and fixed molds to assist in positioning.
2. Launch of the agency During the opening process, the mechanism needs to be rolled out to roll out or unplug the plastic products and their condensate in the flow channel. The fixing plate and the push plate were pushed out to hold the putter.
The reset lever is usually fixed to the putter, and the reset lever resets the push plate when the mold is closed in a fixed and moving manner.
3. Side core pumping mechanism Some plastic products with lateral concave or lateral holes must be side-partitioned before they are rolled out. Only the side core is pulled out, the mold can be smoothly demoulding. At this point, you need to set the side core pumping mechanism in the mold.
