• 48L Laundry basket Plastic Injection Mould

    48L Laundry basket Plastic Injection Mould

    Laundry Basket Size: 489.2 X 622.7 X 233.9mm Basket Weight: 0.59 kgs Gate system: 5 tips Hot Runner Not all molding applications are suitable for runner-less molding. Some materials are heat sensitive and the time to temperature relationship - especially when the shot size is very small - can be a problem. Some families of parts, for handling and orientation purposes, may be best kept attached to the runner until they reach another downstream operation. In other instances, the required volume of parts may be so small that the added cost of the hot runner system to the mold price cannot be justified.

    Read More
  • Plastic Flower Transportation Crate Injection Mould

    Plastic Flower Transportation Crate Injection Mould

    This design is really complicated; it has not only sliders in the 4 sides like normal crates, but also many lifters to form the bottom design. We used hundreds of pins to form the needle shapes. There are many small holes in the middle part of the crate, which makes the mold more difficult, because we have to add sliders to form these holes under the existing complex mold structure. Because of the intricate structure design at the bottom, NC processing takes a lot of time.

    Read More
  • Plastic Beer Crate Injection Mould

    Plastic Beer Crate Injection Mould

    Beer crate 1. 12 bottles: 360 * 275 * 316mm 2. 20 bottles: 450 * 365 * 315mm 3. 24 bottles: 530 * 360 * 320mm It is made of 100% high-density polyethylene (HDPE) for injection molding. It has the characteristics of heat resistance, cold resistance and corrosion resistance. It can withstand high temperature up to 120 degrees and low temperature resistance to minus 30 degrees. And the appearance is smooth, no burrs, and durable!

    Read More
  • Plastic Foldable Banana Crate Injection Mould

    Plastic Foldable Banana Crate Injection Mould

    This foldable banana crate is so useful that we have already made 2 sets injection molds for our customer, and now we are making the third sets. Our customer is the biggest banana supplier in Mexico, and they would like to transport bananas from Mexico to USA. In the beginning, they asked us to design one crate which can be stacked up for 8 crates in each row without any deformation of crate. It means the crate should be strong enough as each crate has more than 15 kilos of banana inside, and the bottom crate must bear at least 105 kilos. Besides, when the crates are sent to the ripening room by forklift, they cannot be shaken or fallen, although they are stacked eight stories high. It means our design should be very precise to avoid any shaking or falling between the crate and the crate during handling.

    Read More
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Email :
Company :
  • Name :

  • Phone:

Message :