• Double Color Drinking Cup Plastic Injection Mould

    Double Color Drinking Cup Plastic Injection Mould

    Double color molding process is that the two-color products are moulded by one double color injection machine and two-color mold at once, the double color product is only ejected once. Generally, this molding process is also called two-component injection molding, which is usually completed by a set of molds and requires a special two-color injection molding machine. Plastic products are used two different color, two different types of plastics or two identical plastics, and the two plastics can be clearly distinguished on the product are called two-color plastic products. Installed in a two-color injection molding machine with two sets of injection devices, a mold that injects two plastics in sequence and generates a two-color product is called a two-color mold.

    Read More
  • Two-color Citrus Squeezer Plastic Injection Mold

    Two-color Citrus Squeezer Plastic Injection Mold

    The structure of the main part is very strong. It can squeeze all kinds of citrus fruits, such as oranges, tangerines, limes and lemons. It also has large capacity for juice. The citrus squeezer has very good touch feel, you can’t see any mark or parting line in the obvious side including the injection point, we make the injection point in the middle of the squeezer, it just looks like the base of lemon. The white part material is PP, it has very smooth touch without any burrs or sharp edges, and the yellow part material is TPE which is soft, and with the texture design, even if the hand is wet, it will not slide, so it is more convenient to use.

    Read More
  • Double Color Plastic Injection Mold for Mobile Phone Charging Holder

    Double Color Plastic Injection Mold for Mobile Phone Charging Holder

    This double color mobile phone holder has many advantages, such like: 1. It's light and portable, saving space. 2. It is suitable for all kinds of mobile phones, digital cameras, MP3 players, and other portable small appliances. 3. It is very convenient to fold when not in use and easy to open when in use. 4. You don’t need to worry about the length of the cable when charging anymore. It's a good helper when charging your mobile phone! 5. It is made of high quality PP material, resistant to dirt, convenient and easy to clean. 6. The support plate is made by two-color injection molds which is more colorful and much more eye attractive than single color one.

    Read More
  • Double Color Lotus Collapsible Strainer Plastic Injection Mould

    Double Color Lotus Collapsible Strainer Plastic Injection Mould

    Focare Mould demonstrates the capability of design and the power on double color molds. The new two-color collapsible strainer is so high quality. The product has fine appearance, delicate texture, and good feeling when holding and collapsing.

    Read More
  • Durable Double Color Plastic Egg Tray

    Durable Double Color Plastic Egg Tray

    This double color plastic egg tray is made out of PP (white body) +TPE (orange bottom) by the two-color rotary injection mould, and the cover is made out of GPPS which is transparent and stronger, using TPE as bottom in order to keep eggs out of crushing, what’s more, we put four anti-slip pads each corner under the bottom to keep it away from slipping on the table or the fridge.

    Read More
  • Double Color Seal Ring of SWR Pipe Fittings Plastic Injection Mould

    Double Color Seal Ring of SWR Pipe Fittings Plastic Injection Mould

    The advantages of two-color O-ring are as below: 1. It consists of a plastic reinforced double component seal ring which holds the O-ring in groove properly, thus ensuring 100% leak proof joints 2. Enough power to the joints to withstand high pressure flow rates 3. Dimensional stability, remains intact while installation. 4. Easier installation. 5. Passes pressure test requirement. 6. Can be made in color combination desired by customer. 7. It is made with the advanced co-moulding technology

    Read More
  • Two-Color Plastic Gargle Cup Injection Molds

    Two-Color Plastic Gargle Cup Injection Molds

    This two-color mug mold adopts hot runner technology to eliminate the flow channel aggregate and realize production automation; the cavity adopts the conventional waterway, and the core adopts the conformal waterway design.

    Read More
  • Kitchen Collapsible/Flexible Funnels Two-Color Injection Mold

    Kitchen Collapsible/Flexible Funnels Two-Color Injection Mold

    The conventional plastic funnel is not easy for carry and storage. Now, some suppliers developed two-component plastic collapsible/flexible funnels which is foldable design, compact and convenient and space saving. It is made by PP on top edge and bottom to strengthen the main plastic part and TPE for the collapsible body. It could be used to sub package the cooking oil, cooking wine, vinegar and so on in the kitchen, can also be used to sub package various detergents, dish washing liquid, bath gel, shampoo and so on.

    Read More
  • Two-Color Squeegee Plastic Injection Mould

    Two-Color Squeegee Plastic Injection Mould

    A squeegee is a tool with a flat, smooth soft plastic lade, used to remove or control the flow of liquid on a flat surface. It is used for cleaning water or liquid from window glass, tile wall or tile floor. Two-color plastic injection squeegee are combined by raw material PP+TPE which is lighter, more beautiful and colorful than steel one. The raw material of PP is relatively hard. When we use the wiper, it can have good support. The raw material of TPE is soft, which can prevent the surface of the glass from being scratched. In addition, the part of the handle is also made of PP+TPE. The TPE feels soft and non-slip, which allows us to have a more comfortable using experience.

    Read More
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Email :
Company :
  • Name :

  • Phone :

Message :