• Plastic Tea Bottle Cap Injection Mould

    Plastic Tea Bottle Cap Injection Mould

    The general water bottles are round and sometimes take space in the bags, but these water bottles are square. If they are placed properly, they can save a lot of space inside your bag.

    Read More
  • Baby Walker Plastic Injection Mould

    Baby Walker Plastic Injection Mould

    In order to reduce the weight of baby walker, most of parts are made by plastic. On the other hand, plastic parts are stronger and colorful. Therefore, the quality of plastic parts of baby walker become very important. The key point of plastic injection mould for making baby walker is to get smooth surface and parting line to avoid injury against babies. Meanwhile, the assembly among of all plastic parts for baby walker is required flat without difference in level, prevent from collapse, enough strong and so on. It has to pay attention on the shrinkage of molds design and precise mold fabrication in order to get perfect assembly of baby walker, especially the small toy parts.

    Read More
  • Two-Color Pet Slow Feeder Bowl Plastic Injection Mould

    Two-Color Pet Slow Feeder Bowl Plastic Injection Mould

    Slow feed bowls tend to be simple designs that provide just enough of a barrier to slow your pup down. Puzzle feeders are great if your dog gets bored easily, regardless of their behavior at mealtime. By putting them to work for the reward of food, you get the double benefit of slowing them down while also providing a challenge that stimulates their mind.

    Read More
  • Toilet Seat and Lid Plastic Injection Mould

    Toilet Seat and Lid Plastic Injection Mould

    The total weight of the whole set plastic toilet seat is 650 gm, made by PP. The two plastic injection moulds of main body are made 1 cavity with one tip hot runner. As for the rest of the components we apply cold runner and 4 cavities. Seven moulds plus a 125 and 350 ton plastic injection machine is sufficient to manufacture a plastic toilet seat, which is really a good investment while the toilet seat is so high demand on markets.

    Read More
  • Double Color Plastic Fruit Bowl Injection Mould

    Double Color Plastic Fruit Bowl Injection Mould

    Most of customers don’t want to invest double color injection machine. However, you can consider to produce two plastic products on your double color machine in future, or produce only one plastic part on double color machine. It won’t leave your double color injection machine unused if double color products range has not yet been developed too much. Two-color plastic injection products become more popular at market day by day, it is right time to invest and develop double color plastic products at this moment.

    Read More
  • Plastic Industrial Safety Helmet Injection Mould

    Plastic Industrial Safety Helmet Injection Mould

    Industrial safety helmets are widely used on building and workshop to protect the head from injury due to falling objects, impact with other objects, debris, rain, and electric shock. For making plastic industrial safety helmets, PC or ABS plastic material are the best selection which has the best impact resistance, light weight, high toughness, less fracture, and easy processing.

    Read More
  • Swing Cover of Dustbin Plastic Injection Mould

    Swing Cover of Dustbin Plastic Injection Mould

    The acceptable checking list of swing cover of dustbin are as below: 1. Cover shall be flat without deformation. 2. Cover of trash bin shall align the same level with cover supporter. 3. Cover shall come back original position automatically after swinging. 4. Cover be rotated evenly. 5. Supporter of cover is prohibited being deformed after ejecting out from mold cavity and cooling. 6. No flash around supporter.

    Read More
  • Car Side Mirror Plastic Injection Mould

    Car Side Mirror Plastic Injection Mould

    The features of mold design for car mirror are as below: 1. The smooth appearance is very important for car parts. It is prohibited to have any gape among of all assembly parts, hence, the shrinkage ratio is key-point on making mold design. 2. The sliders shall be finished by automatic machinery to ensure the accurate dimension. Meanwhile, the moving position of sliders shall be very stable and precise in order to avoid flash or lines. 3. In order to avoid scratching of texture, the ejecting angle shall be 5 degree above. 4. The plasticizing material flow will influence the surface of car mirror. The plastic material flow channels will be affected by structure of injection runners. Meanwhile, the runner will be the factors of cycle time and material consumption.

    Read More
  • Floor Drain Plastic Injection Mould

    Floor Drain Plastic Injection Mould

    This floor drain is made by rigid PVC which mould steel shall be used S136. The steel structure is pure and fine, with excellent corrosion resistance, polishing, wear resistance, machining, and dimensional stability when quench. S136 can be used in all molds. Because of its special properties and materials, it is more suitable for the application and needs of special environment.

    Read More
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Email :
Company :
  • Name :

  • Phone:

Message :