• Two-Color plastic Lighter handle Injection Mould

    Two-Color plastic Lighter handle Injection Mould

    Most two-color lighter handles are made from plastic injection molds with rotating shafts. The rotating shaft process or the rotating core process means that the two-color plastic injection mold is not rotated by the injection molding machine, but the core is rotated by the injection molding machine or the injection mold cylinder. When the injection molded part is made into the second color, the controller of the injection molding machine will send a signal of the core pulling system, rotate the first core of the mold to the second position of the core, and then perform the injection of the second color.

    Read More
  • PVC 2-Color Band of Slipper injection molud

    PVC 2-Color Band of Slipper injection molud

    We only need to have a mold for two-color PVC strap for flip-flops and one 280T two-color injection molding machine. Focare Mold can provide you maximum 16 + 16 cavity two-color strap mold, if you are interested in making two-color PVC strap for flip-flops, please contact us.

    Read More
  • Two- color airtight food container plastic injection mold

    Two- color airtight food container plastic injection mold

    For this type of airtight food container, there are buckles on the side to ensure the tightness and prevent the leakage. Some buckles are made separately, however we made the two-color lid and buckles as one-piece. Therefore, a two-color lid and a body are one complete set, which makes product be lighter and simple. The weight of lid is 33g (25.5g for PP, 7.5g for TPE), and the body is 34g (33.3g for PP, 0.7g for TPE). On the other hand, producers can avoid on purchasing mould for buckles, which can save time and cost.

    Read More
  • Portable & Collapsible Pet Food & Water Bowl Double Color Plastic Injection mould

    Portable & Collapsible Pet Food & Water Bowl Double Color Plastic Injection mould

    The bowl made of this PP + TPE material has the following advantages: 1. Folding design, easy to go out. 2. Non-toxic plastic, safe, durable and easy to clean. 3. Hanging buckle design, can be hung on the cage or pet stroller. 4. Bottle hanging design, which can be installed on the water bottle to make the dog eat better.

    Read More
  • Foldable/Portable Outdoor Camping/Cleaning Double Component Bucket Mould

    Foldable/Portable Outdoor Camping/Cleaning Double Component Bucket Mould

    Product Size: 46x30.3x20.4cm Material: PP+TPE Weight: 580G - Durable and tough material, essential barrels for home camping. - Collapsible storage, clean and neat, does not take up space - Excellent texture, abrasion resistance, high and low temperature resistance, good grip

    Read More
  • Two-Color Pet Slow Feeder Bowl Plastic Injection Mould

    Two-Color Pet Slow Feeder Bowl Plastic Injection Mould

    Slow feed bowls tend to be simple designs that provide just enough of a barrier to slow your pup down. Puzzle feeders are great if your dog gets bored easily, regardless of their behavior at mealtime. By putting them to work for the reward of food, you get the double benefit of slowing them down while also providing a challenge that stimulates their mind.

    Read More
  • Double Color Drinking Cup Plastic Injection Mould

    Double Color Drinking Cup Plastic Injection Mould

    Double color molding process is that the two-color products are moulded by one double color injection machine and two-color mold at once, the double color product is only ejected once. Generally, this molding process is also called two-component injection molding, which is usually completed by a set of molds and requires a special two-color injection molding machine. Plastic products are used two different color, two different types of plastics or two identical plastics, and the two plastics can be clearly distinguished on the product are called two-color plastic products. Installed in a two-color injection molding machine with two sets of injection devices, a mold that injects two plastics in sequence and generates a two-color product is called a two-color mold.

    Read More
  • Two-color Citrus Squeezer Plastic Injection Mold

    Two-color Citrus Squeezer Plastic Injection Mold

    The structure of the main part is very strong. It can squeeze all kinds of citrus fruits, such as oranges, tangerines, limes and lemons. It also has large capacity for juice. The citrus squeezer has very good touch feel, you can’t see any mark or parting line in the obvious side including the injection point, we make the injection point in the middle of the squeezer, it just looks like the base of lemon. The white part material is PP, it has very smooth touch without any burrs or sharp edges, and the yellow part material is TPE which is soft, and with the texture design, even if the hand is wet, it will not slide, so it is more convenient to use.

    Read More
  • Double Color Car Light Plastic Injection Mould

    Double Color Car Light Plastic Injection Mould

    The two-color mold technology uses multiple materials for injection molding production, and combines the characteristics of different materials during the molding process to assemble or other suitable bonding methods to improve product functionality and aesthetics. Automotive lights in two-color molds are an important application area. The features of double color car lights molds are as below: 1. The moving side of double color molds will be rotated by rotary table of double color injection machine. Hence, car lights shall be fixed on moving mold well to avoid being stuck in cavity side. 2. The fixing position after mold rotation shall be very precise, hence, the rotary table of injection machine shall be driven with servo motor instead of hydraulic motor. 3. Injecting stroke shall be designed as shorter as possible in order to enhance the strength of ejecting rod.

    Read More
<1234567>Total 79 Records
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Email :
Company :
  • Name :

  • Phone :

Message :